Demonstration Plan for Wellhead Monitoring TechnologiesDIANE Publishing |
Expressions et termes fréquents
1,1,1-Trichloroethane 1,2-Dichloroethane accuracy AccuSensor system Air Force Base analytical Audit Benzene calibration Carbon Tetrachloride carrier gas chemical chlorinated Column concentration levels contamination cylinder Data Management decontamination Demo demonstration plan detection level detection limits detector documented exposure field demonstration gas chromatograph groundwater samples hazards headspace Health and Safety Innova McClellan AFB McClellan Air Force measurement method monitoring technologies O-Xylene on-site operation organic vapor performance characteristics Photoacoustic Photoacoustic Spectroscopy potential ppmv procedures project manager purge radiation radiological range reference laboratory relative standard deviation replicate response SAFETY OFFICER sample collection sample throughput sampling team Sandia National Laboratories Savannah River Savannah River Site Scentograph Section specific Table technology demonstration Technology Developer technology performance Technology Verification Report temperature Tetrachloroethene Trichloroethene verification organization volatile organic compounds Voyager waste water samples wellhead monitoring zone
Fréquemment cités
Page 15 - ETV, which remains unchanged, is to verify the environmental performance characteristics of commercial-ready technology through the evaluation of objective and quality assured data, so that potential purchasers and permitters are provided with an independent and credible assessment of what they are buying and permitting.
Page 93 - Completeness refers to the amount of data collected from a measurement process compared to the amount that was expected to be obtained.
Page 15 - Agency (EPA) has evaluated technologies to determine their effectiveness in monitoring, preventing, controlling, and cleaning up pollution. Since the early 1990s, however, numerous government and private groups have identified the lack of an organized and ongoing program to produce independent, credible performance data as a major impediment to the development and use of innovative environmental technology. Such data are needed by technology buyers and permitters both at home and abroad to make informed...
Page 93 - Data comparability, ie, a measure of the confidence with which one data set can be compared to another.
Page 120 - Cylinders may be stored in the open, but in such cases should be protected against extremes of weather and from the dampness of the ground to prevent rusting. During the summer, cylinders stored in the open should be shaded against the continuous direct rays of the sun in those localities where extreme temperatures prevail.
Page 93 - Representativeness Representativeness refers to the degree to which the data accurately and precisely represent the conditions or characteristics of the parameter represented by the data.
Page 95 - The individual operators and the laboratory supervisor shall examine calibration and QC data. Laboratory and project managers shall verify that all instrument systems are in control and that QA objectives for accuracy, completeness, and method detection limits have been met. Analytical outlier data are defined as those QC data lying outside a specific QC objective window for precision and accuracy for a given analytical method. Should QC data be outside of control limits, the analytical laboratory...
Page 109 - ... personnel. If immediate medical treatment is required to save a life, decontamination should be delayed until the victim is stabilized. If decontamination can be performed without interfering with essential life,saving techniques or first aid. or if a worker has been contaminated with an extremely toxic or corrosive material that could cause severe injury or loss of life, decontamination should be continued.
Page 17 - Market Gap Definition Lastly, EPA will track applications and expressions of interest on the part of technology developers who come to all parts of the Agency that do not fit into the present suite of verification activities. This universe will be characterized during the initial stages of the pilot period and a strategy to address gaps will be developed.
Page 96 - PE samples come with statistics about each sample which have been derived from the analysis of the sample by a number of laboratories using EPA-approved methods. These statistics include a true value of the PE sample, a mean of the laboratory results obtained from the analysis of the PE sample, and an acceptance range for sample values. The analytical laboratory is expected to provide results from the analysis of the PE samples that meet the performance objectives of the verification...